冷热冲击箱-三箱式

上传时间：2020-12-25

型号     Model		AZTS 130S	AZTS 320S
电源     Power Supply		交流380V   50赫兹 3相+N+PE     AC 380V 50HZ 3 phase+N+PE
最大电流     Maximum Current (SUT/SUTH) (A)		39	46
最大功率     Maximum Power (SUT/SUTH) (KW)		22	25.5
使用环境温/湿度       Operation Environment		+15～+35℃/≤85%RH
形式     Type		三厢式     Three Zone
控制方式     Control Mode		独立的冷端和热端PID调节，热量和冷量均可连续调节     Independent PID regulation of consecutive cooling and heating capacity
性能*1     Performance*1	温度范围     Temperature Range	低温区-80℃～+60℃   高温区 +60～+200℃     Cold Zone: -80℃～+60℃, Hot Zone: +60～+200℃
	温度波动度     Temperature Fluctuation	≤±0.5℃
	恢复时间为15分钟的温度及负载条件     Test condition with load for 15 minutes recovering time	带5kg电路板-55℃/+125℃     -55℃/+125℃ with 5kg electrionic board
观察窗     Inspection Window		多层导电膜加热观察窗，尺寸W240mmxH310mmx1     Multilayer glasses with conducting film heating, size W240mmxH310mmx1
控制器     Controller System		AZ-1000控制仪表集成西门子S7可编程控制器     AZ-1000 controller integrated with Siemens S7 PLC
冷凝方式     Condenser		风冷冷凝器     Air-cooled condenser	风冷冷凝器     Air-cooled condenser
内容积   （升）     Interior Capacity (L)		124	319
内尺寸     Interior Size	W(mm)	580	700
	D(mm)	510	700
	H(mm)	420	650
外尺寸     Exterior Size	W(mm)	1400	2740
	D(mm)	1780	1700
	H(mm)	1950	2450
标准配置     Standard Configuration		●   脚轮/Castors     ● 照明/Lighting     ● USB接口及历史数据回放及转换软件/USB interface and history data review and converting   software
可选配置     Optional Configuration		○   电缆孔带硅胶塞Φ25mm/Cable port with silicon plug Φ25mm     ○ 隔板/Shelf     ○ 水冷冷凝方式/Water cooled condenser (CST 27 2T, CST 84 2T)     ○ 外部插座 220V 10A/Exterior socket 220V 10A     ○ LAN接口及远程控制软件/LAN interface and remote control software     ○ 数字量输入报警接口x4/Digital alarm input channels x 4     ○ 数字量输出继电器接口x4 (试验品用)/Auxiliary relay digital output channels x 4 (for   specimens)     ○ 额外温度采集通道x1 用于测量试验品温度 数据可储存回放(T型热电偶)        Additional temperature sampling   channels x 1, for sampling temperature of test specimen, data can be reviewed   and recorded (T thermocouple)     ○ 根据试验品温度切换高低温区功能        Switching the test zone accoding   to the test specimen temperature     ○ 额外模拟量采集通道x4 数据可在控制器上储存回放(PT100，T型热电偶，4～20mA，0～10V, -10V～10V可选)        Additional analog sampling   channels x 4, sampling data can be reviewed and recorded (Option: PT100/T   thermocouple/4～20mA/0～10V/-10V～10V)     ○ 额外模拟量采集通道x8 数据可在控制器上储存回放(PT100，T型热电偶，4～20mA，0～10V, -10V～10V可选)        Additional analog sampling   channels x 8, sampling data can be reviewed and recorded (Option: PT100/T   thermocouple/4～20mA/0～10V/-10V～10V)     ○ 模拟量输出通道x3 (设定高温，设定低温，采样温度)        Analog output channels x 4   (Setting high temperature/Setting low temperature/measured temperature)     ○ 干燥新风补偿/Compressed dry air purging system
*1:   性能指标在室温为+25℃时测定;传感器处于空气处理单元出风口;         All the above specifications are   measured at +25℃ room temperature and the sensors are installed at blow-out   of air conditioning unit;